Tying Instructions: Chamois Nymph
1. Attach a lead wire to the hook shank and wrap 6-7 times. Secure with thread wraps.
Step One
2. Attach a small bundle of Flash material to the shank just above the barb. Adjust the length of the tag end so that it does not exceed the bend of the hook.
Step Two
3. Attach a slim strip of chamois that is about 1/8 inch wide. Taper the end that is secured to the hook shank. Butt the end of the chamois strip to the lead wraps abd secure with thread wraps.
Step Three
4. Wrap the flash forward, covering the secured chamois and wrapping up to an eye width behind the eye. Secure with thread wraps.
Step Four
5. Wrap the chamois forward tightly and secure about one eye width behind the eye. Trim off the tag and secure with thread wraps.
Step Five
6. Attach an ostrich herl by the butt and wrap 6-7 times for a thick thorax. Secure and whip finish.
Step Six

©2005 Steve Schalla
This page is not to be copied without my explicit permission.

Valid HTML 4.0!